ENGRAVING TOOLS

page 162 & 164: RTC, RSC, RNC

Split-End Engraving Tools
Two Ends Split--Relieved for Right Hand Cut

(RNC, RSC, RTC)

page 166: RTC, RSC, RNC
 

Inch Catalog Page: 163 & 165

  

 

 
Shank Diameter	+.0001 -.0003" finish ground
Split Tolerance	+.001 -.000"  of tool center
Offset Point	±015"

Other sizes also available.
 
Metric sizes also from stock.

CONICAL POINT--30° INCLUDED ANGLE

TOOL # DIMENSIONS
SHANK DIA. OVERALL LENGTH SPLIT LENGTH OFFSET POINT
D L1 L2 Y
RTC-125-2 1/8 1 1/2 3/8 .004
RTC-187-2 3/16 2
RTC-250-2 1/4 2 1/2
RTC-312-2 5/16 1/2
RTC-375-2 3/8
RTC-500-2 1/2 3 5/8
RTC-250-220 1/4 2 1/2 1/2 .010
RTC-250-230 .015
RTC-250-245 .022
RTC-250-260 .030
 

CONICAL POINT--60° INCLUDED ANGLE

TOOL # DIMENSIONS
SHANK DIA. OVERALL LENGTH SPLIT LENGTH OFFSET POINT
D L1 L2 Y
RSC-125-2 1/8 1 1/2 3/8 .004
RSC-187-2 3/16 2
RSC-250-2 1/4 2 1/2
RSC-312-2 5/16 1/2
RSC-375-2 3/8
RSC-500-2 1/2 3 5/8
RSC-250-220 1/4 2 1/2 1/2 .010
RSC-250-230 .015
RSC-250-245 .022
RSC-250-260 .030

 

CONICAL POINT--90° INCLUDED ANGLE (Suitable For Chambering)
TOOL # DIMENSIONS
SHANK DIA. OVERALL LENGTH SPLIT LENGTH OFFSET POINT
D L1 L2 Y
RNC-125-2 1/8 1 1/2 3/8 .004
RNC-187-2 3/16 2
RNC-250-2 1/4 2 1/2
RNC-312-2 5/16 1/2
RNC-375-2 3/8
RNC-500-2 1/2 3 5/8
RNC-250-220 1/4 2 1/2 1/2 .010
RNC-250-230 .015
RNC-250-245 .022
RNC-250-260 .030

 

 

Micro 100 Tool Corporation

1410 E Pine Ave, Meridian, ID 83642 USA

Tel: 208-888-7310       Fax: 208-888-2106

Toll Free: 800-421-8065

 

Send e-mail to Micro 100 Tool Corporation
or call at 1-800-421-8065